dmesg - Cortex A15 Chromebook
Booting Linux on physical CPU 0
Initializing cgroup subsys cpu
Linux version 3.4.0 (chrome-bot@build31-m2) (gcc version 4.6.x-google 20120301 (prerelease) (gcc-4.6.3_cos_gg_2a32ae6) ) #1 SMP Mon Nov 5 16:09:31 PST 2012
CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine: SAMSUNG EXYNOS5 (Flattened Device Tree), model: Google Snow
Ramoops: 41f00000 - 41ffffff
Memory policy: ECC disabled, Data cache writealloc
CPU EXYNOS5250 (id 0x43520010)
exynos5_init_clocks: initializing clocks
S3C24XX Clocks, Copyright 2004 Simtec Electronics
exynos5_setup_clocks: registering clocks
exynos5_setup_clocks: xtal is 24000000
EXYNOS5: PLL settings, A=1700000000, B=800000000, C=333000000
M=1600000000, E=192000000 V=300000000 G=533000000
EXYNOS5: ARMCLK=1700000000, CDREX=800000000, ACLK400G3D=533000000
ACLK333=333000000, ACLK266=266666666, ACLK200=200000000
ACLK166=166500000, ACLK66=66666666
sclk_fimd: source is mout_mpll_user (6), rate is 266666666
aclk_266_gscl: source is aclk_266 (1), rate is 266666666
sclk_g3d: source is mout_mpll_user (0), rate is 800000000
sclk_sata: source is mout_mpll_user (0), rate is 66666666
sclk_gscl_wrap: source is ext_xtal (0), rate is 24000000
sclk_gscl_wrap: source is ext_xtal (0), rate is 24000000
sclk_cam0: source is ext_xtal (0), rate is 24000000
sclk_cam1: source is ext_xtal (0), rate is 24000000
sclk_usbdrd30: source is mout_mpll (0), rate is 66666666
On node 0 totalpages: 524032
Normal zone: 3568 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 452880 pages, LIFO batch:31
HighMem zone: 528 pages used for memmap
HighMem zone: 67056 pages, LIFO batch:15
PERCPU: Embedded 9 pages/cpu @81841000 s12480 r8192 d16192 u36864
pcpu-alloc: s12480 r8192 d16192 u36864 alloc=9*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519936
Kernel command line: cros_secure console= console=tty1 debug verbose root=/dev/mmcblk0p7 rootwait rw
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
Memory: 31MB 2016MB = 2047MB total
Memory: 2069552k/2070576k available, 26576k reserved, 270336K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0x80000000 - 0xef800000 (1784 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.text : 0x80008000 - 0x806e8938 (7043 kB)
.init : 0x806e9000 - 0x8072b0c0 ( 265 kB)
.data : 0x8072c000 - 0x80796ee8 ( 428 kB)
.bss : 0x80796f0c - 0x808235a0 ( 562 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:549
irq: no irq domain found for /interrupt-controller@10440000 !
of_irq_init: children remain, but no parents
Initial usec timer 30769384
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
Console: colour dummy device 80x30
console [tty1] enabled
Calibrating delay loop... 1694.10 BogoMIPS (lpj=4235264)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
ftrace: allocating 19505 entries in 58 pages
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
Setting up static identity map for 0x404e92e8 - 0x404e9340
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU1: Unknown IPI message 0x1
Brought up 2 CPUs
SMP: Total of 2 processors activated (3388.21 BogoMIPS).
devtmpfs: initialized
gpiochip_add: registered GPIOs 0 to 7 on device: GPA0
gpiochip_add: registered GPIOs 9 to 14 on device: GPA1
gpiochip_add: registered GPIOs 16 to 23 on device: GPA2
gpiochip_add: registered GPIOs 25 to 29 on device: GPB0
gpiochip_add: registered GPIOs 31 to 35 on device: GPB1
gpiochip_add: registered GPIOs 37 to 40 on device: GPB2
gpiochip_add: registered GPIOs 42 to 45 on device: GPB3
gpiochip_add: registered GPIOs 47 to 53 on device: GPC0
gpiochip_add: registered GPIOs 55 to 58 on device: GPC1
gpiochip_add: registered GPIOs 60 to 66 on device: GPC2
gpiochip_add: registered GPIOs 68 to 74 on device: GPC3
gpiochip_add: registered GPIOs 84 to 87 on device: GPD0
gpiochip_add: registered GPIOs 89 to 96 on device: GPD1
gpiochip_add: registered GPIOs 98 to 103 on device: GPY0
gpiochip_add: registered GPIOs 105 to 108 on device: GPY1
gpiochip_add: registered GPIOs 110 to 115 on device: GPY2
gpiochip_add: registered GPIOs 117 to 124 on device: GPY3
gpiochip_add: registered GPIOs 126 to 133 on device: GPY4
gpiochip_add: registered GPIOs 135 to 142 on device: GPY5
gpiochip_add: registered GPIOs 144 to 151 on device: GPY6
gpiochip_add: registered GPIOs 76 to 82 on device: GPC4
gpiochip_add: registered GPIOs 153 to 160 on device: GPX0
gpiochip_add: registered GPIOs 162 to 169 on device: GPX1
gpiochip_add: registered GPIOs 171 to 178 on device: GPX2
gpiochip_add: registered GPIOs 180 to 187 on device: GPX3
gpiochip_add: registered GPIOs 189 to 196 on device: GPE0
gpiochip_add: registered GPIOs 198 to 199 on device: GPE1
gpiochip_add: registered GPIOs 201 to 204 on device: GPF0
gpiochip_add: registered GPIOs 206 to 209 on device: GPF1
gpiochip_add: registered GPIOs 211 to 218 on device: GPG0
gpiochip_add: registered GPIOs 220 to 227 on device: GPG1
gpiochip_add: registered GPIOs 229 to 230 on device: GPG2
gpiochip_add: registered GPIOs 232 to 235 on device: GPH0
gpiochip_add: registered GPIOs 237 to 244 on device: GPH1
gpiochip_add: registered GPIOs 246 to 253 on device: GPV0
gpiochip_add: registered GPIOs 255 to 262 on device: GPV1
gpiochip_add: registered GPIOs 264 to 271 on device: GPV2
gpiochip_add: registered GPIOs 273 to 280 on device: GPV3
gpiochip_add: registered GPIOs 282 to 283 on device: GPV4
gpiochip_add: registered GPIOs 285 to 291 on device: GPZ
dummy:
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
S3C Power Management, Copyright 2004 Simtec Electronics
EXYNOS5250 PMU Initialize
EXYNOS: Initializing architecture
s3c24xx-pwm s3c24xx-pwm.0: tin at 33333333, tdiv at 33333333, tin=divclk, base 0
bio: create slab at 0
fixed-dummy:
hsichub-reset-l:
wwan-en:
codec-en:
wifi-en:
wifi-rst-l:
i2c-core: driver [tps65090] using legacy suspend method
i2c-core: driver [tps65090] using legacy resume method
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c-i2c s3c2440-i2c.0: slave address 0x00
s3c-i2c s3c2440-i2c.0: bus frequency set to 378 KHz
vdd_ldo8: 1000 mV
vdd_ldo11: 1900 mV
vdd_ldo14: 1900 mV
vdd_mif: 950 1300 mV at 1000 mV
vdd_arm: 850 1350 mV at 1300 mV
vdd_int: 900 1200 mV at 1012 mV
vdd_g3d: 850 1300 mV at 1200 mV
vdd_1v8: 1800 mV
vdd_ummc: 900 3000 mV at 2850 mV
en32khz_ap:
en32khz_cp:
enp32khz:
max77686 0-0009: device found
s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
s3c-i2c s3c2440-i2c.1: slave address 0x00
s3c-i2c s3c2440-i2c.1: bus frequency set to 378 KHz
s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
s3c-i2c s3c2440-i2c.2: slave address 0x00
s3c-i2c s3c2440-i2c.2: bus frequency set to 65 KHz
s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
s3c-i2c s3c2440-i2c.3: slave address 0x00
s3c-i2c s3c2440-i2c.3: bus frequency set to 65 KHz
s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
s3c-i2c s3c2440-i2c.4: GPIO-based arbitration enabled
s3c-i2c s3c2440-i2c.4: slave address 0x00
s3c-i2c s3c2440-i2c.4: bus frequency set to 65 KHz
tps65090 4-0048: No cache defaults, reading back from HW
tps65090 4-0048: Disabling irq acks to chip.
vcd_led: 12000 mV
regulator regulator.20: reg 0x10 enable failed
video_mid: 5000 mV
regulator regulator.21: reg 0x11 enable failed
wwan_r: 3300 mV
sdcard: 3300 mV
regulator regulator.23: reg 0x13 enable failed
camout: 3300 mV
lcd_vdd: 3300 mV
ts: 5000 mV
vinchg:
s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter
s3c-i2c s3c2440-i2c.5: slave address 0x00
s3c-i2c s3c2440-i2c.5: bus frequency set to 65 KHz
s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
s3c-i2c s3c2440-i2c.7: slave address 0x00
s3c-i2c s3c2440-i2c.7: bus frequency set to 65 KHz
s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
s3c-i2c 12ce0000.i2c: slave address 0x00
s3c-i2c 12ce0000.i2c: bus frequency set to 378 KHz
s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter
Linux media interface: v0.10
Linux video capture interface: v2.00
chromeos_arm chromeos_arm: chromeos system detected
Advanced Linux Sound Architecture Driver Version 1.0.25.
Switching to clocksource mct-frc
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 49152 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 49152 bytes)
NET: Registered protocol family 1
s3c-adc 12d10000.adc: attached adc driver
highmem bounce pool size: 64 pages
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 3514
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-2364208
dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-2364208
dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-2364208
dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
tpm_tis_i2c 3-0020: 1.2 TPM (device-id 0xB)
console [pstore-1] enabled
[drm] Initialized drm 1.1.0 20060810
Attached IOMMU controller to exynos5-fb device.
i2c i2c-2: attached s5p_ddc into i2c adapter successfully
i2c i2c-8: attached s5p_hdmiphy into i2c adapter successfully
[drm] hdmiphy_s_power: hdmiphy is on
[drm] hdmiphy_s_power: hdmiphy is off
s5p-mixer s5p-mixer: probe start
Attached IOMMU controller to s5p-mixer device.
exynos-drm exynos-drm.0: No SYSMMU found
Attached IOMMU controller to exynos-drm.0 device.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
Console: switching to colour frame buffer device 170x48
s5p-dp s5p-dp: EDID data does not include any extensions.
s5p-dp s5p-dp: EDID Read success!
s5p-dp s5p-dp: Link Training success!
fb0: frame buffer device
drm: registered panic notifier
[drm] Initialized exynos 1.0.0 20110530 on minor 0
v4 support
mali mali.0: Probed as mali0
loop: module loaded
chromeos-ec 4-001e: protocol version: 2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
s5p-ehci s5p-ehci: S5P EHCI Host Controller
s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
s5p-ehci s5p-ehci: irq 103, io mem 0x12110000
s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: S5P EHCI Host Controller
usb usb1: Manufacturer: Linux 3.4.0 ehci_hcd
usb usb1: SerialNumber: s5p-ehci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
exynos-ohci exynos-ohci: Already power on PHY
exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
exynos-ohci exynos-ohci: irq 103, io mem 0x12120000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EXYNOS OHCI Host Controller
usb usb2: Manufacturer: Linux 3.4.0 ohci_hcd
usb usb2: SerialNumber: exynos-ohci
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
xhci-hcd xhci-hcd: xHCI Host Controller
xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd: irq 104, io mem 0x12000000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.4.0 xhci-hcd
usb usb3: SerialNumber: xhci-hcd
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd: xHCI Host Controller
xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.4.0 xhci-hcd
usb usb4: SerialNumber: xhci-hcd
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for generic
input: chromeos-ec as /devices/s3c2440-i2c.4/i2c-4/4-001e/input/input0
rtc-max77686 max77686-rtc: rtc core: registered rtc-max77686 as rtc0
s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
cyapa 1-0067: Cypress APA Trackpad Information:
Product ID: CYTRA-116002-00
Protocol Generation: 3
Firmware Version: 2.4
Hardware Version: 2.0
Max ABS X,Y: 1280,680
Physical Size X,Y: 98,55
s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1
Attached IOMMU controller to mfc_r device.
Attached IOMMU controller to mfc_l device.
input: Cypress APA Trackpad (cyapa) as /devices/s3c2440-i2c.1/i2c-1/1-0067/input/input1
s5p-mfc s5p-mfc-v6: decoder registered as /dev/video10
s5p-mfc s5p-mfc-v6: encoder registered as /dev/video11
Attached IOMMU controller to exynos-gsc.0 device.
[INFO]gsc_probe:1289: gsc-0 registered successfully
Attached IOMMU controller to exynos-gsc.1 device.
[INFO]gsc_probe:1289: gsc-1 registered successfully
Attached IOMMU controller to exynos-gsc.2 device.
[INFO]gsc_probe:1289: gsc-2 registered successfully
Attached IOMMU controller to exynos-gsc.3 device.
[INFO]gsc_probe:1289: gsc-3 registered successfully
exynos-mdev.0: Media0[0xef0f5400] was registered successfully
exynos-mdev.1: Media1[0xef0f5800] was registered successfully
exynos-mdev.2: Media2[0xef0f5c00] was registered successfully
ntc-thermistor ncp15wb473.0: Thermistor ncp15wb473:0 (type: ncp15wb473/0) successfully probed.
ntc-thermistor ncp15wb473.1: Thermistor ncp15wb473:1 (type: ncp15wb473/0) successfully probed.
ntc-thermistor ncp15wb473.2: Thermistor ncp15wb473:2 (type: ncp15wb473/0) successfully probed.
ntc-thermistor ncp15wb473.3: Thermistor ncp15wb473:3 (type: ncp15wb473/0) successfully probed.
Exynos: Kernel Thermal management registered
s3c2410_wdt: S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
device-mapper: verity: version 0.1.0 loaded
device-mapper: verity-chromeos: dm-verity-chromeos registered
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Synopsys Designware Multimedia Card Interface Driver
usb 1-2: new high-speed USB device number 2 using s5p-ehci
dw_mmc dw_mmc.0: Using internal DMA controller.
dw_mmc dw_mmc.0: wp gpio not available
mmc0: no vmmc regulator found
dw_mmc dw_mmc.0: Version ID is 241a
dw_mmc dw_mmc.0: DW MMC controller at irq 107, 32 bit host data width, 128 deep fifo
dw_mmc dw_mmc.2: Using internal DMA controller.
mmc1: no vmmc regulator found
dw_mmc dw_mmc.2: Version ID is 241a
dw_mmc dw_mmc.2: DW MMC controller at irq 109, 32 bit host data width, 128 deep fifo
dw_mmc dw_mmc.3: Using internal DMA controller.
dw_mmc dw_mmc.3: wp gpio not available
dw_mmc dw_mmc.3: cd gpio not available
mmc2: no vmmc regulator found
dw_mmc dw_mmc.3: Version ID is 241a
dw_mmc dw_mmc.3: DW MMC controller at irq 110, 32 bit host data width, 128 deep fifo
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 403225HZ div = 62)
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 25000000HZ div = 1)
mmc0: new high speed DDR MMC card at address 0001
mmcblk0: mmc0:0001 SEM16G 14.6 GiB
mmcblk0boot0: mmc0:0001 SEM16G partition 1 2.00 MiB
mmcblk0boot1: mmc0:0001 SEM16G partition 2 2.00 MiB
mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
mmcblk0boot1: unknown partition table
max98095 7-0011: Hardware revision: C
mmcblk0boot0: unknown partition table
asoc: HiFi samsung-i2s.0 mapping ok
asoc: HiFi samsung-i2s.0 mapping ok
input: DAISY-I2S HDMI Jack as /devices/sound.9/sound/card0/input2
input: DAISY-I2S Headphone Jack as /devices/sound.9/sound/card0/input3
usb 1-2: New USB device found, idVendor=0424, idProduct=3503
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: DAISY-I2S Mic Jack as /devices/sound.9/sound/card0/input4
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 3 ports detected
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
EXYNOS5250: Adaptive Support Voltage init
EXYNOS5250: IDS:67 HPM:0 RESULT:1 MIF:0
VFP support v0.3:
mmc_host mmc2: Bus speed (slot 0) = 100000000Hz (slot req 784314Hz, actual 781250HZ div = 64)
implementor 41 architecture 4 part 30 variant f rev 0
ThumbEE CPU extension supported.
Registering SWP/SWPB emulation handler
s5p-mfc s5p-mfc-v6: start latency exceeded, new value 1292 ns
s5p-mfc s5p-mfc-v6: state save latency exceeded, new value 1875 ns
s5p-mfc s5p-mfc-v6: stop latency exceeded, new value 791 ns
s5p-sysmmu s5p-sysmmu.4: start latency exceeded, new value 1000 ns
s5p-sysmmu s5p-sysmmu.4: state save latency exceeded, new value 3833 ns
s5p-sysmmu s5p-sysmmu.4: stop latency exceeded, new value 792 ns
s5p-sysmmu s5p-sysmmu.3: start latency exceeded, new value 958 ns
s5p-sysmmu s5p-sysmmu.3: state save latency exceeded, new value 5125 ns
s5p-sysmmu s5p-sysmmu.3: stop latency exceeded, new value 667 ns
VDD_INT Voltage table set with 1 Group
VDD_MIF Voltage table set with 0 Group
exynos-gsc exynos-gsc.3: start latency exceeded, new value 1250 ns
exynos-gsc exynos-gsc.3: state save latency exceeded, new value 4834 ns
exynos-gsc exynos-gsc.3: stop latency exceeded, new value 750 ns
exynos-gsc exynos-gsc.2: start latency exceeded, new value 1041 ns
exynos-gsc exynos-gsc.2: state save latency exceeded, new value 4042 ns
exynos-gsc exynos-gsc.2: stop latency exceeded, new value 708 ns
exynos-gsc exynos-gsc.1: start latency exceeded, new value 1000 ns
exynos-gsc exynos-gsc.1: state save latency exceeded, new value 3000 ns
exynos-gsc exynos-gsc.1: stop latency exceeded, new value 750 ns
exynos-gsc exynos-gsc.0: start latency exceeded, new value 958 ns
exynos-gsc exynos-gsc.0: state save latency exceeded, new value 3875 ns
exynos-gsc exynos-gsc.0: stop latency exceeded, new value 791 ns
s5p-sysmmu s5p-sysmmu.26: start latency exceeded, new value 1000 ns
s5p-sysmmu s5p-sysmmu.26: state save latency exceeded, new value 6542 ns
s5p-sysmmu s5p-sysmmu.26: stop latency exceeded, new value 750 ns
s5p-sysmmu s5p-sysmmu.25: start latency exceeded, new value 917 ns
s5p-sysmmu s5p-sysmmu.25: state save latency exceeded, new value 6625 ns
s5p-sysmmu s5p-sysmmu.25: stop latency exceeded, new value 792 ns
s5p-sysmmu s5p-sysmmu.24: start latency exceeded, new value 1125 ns
s5p-sysmmu s5p-sysmmu.24: state save latency exceeded, new value 6084 ns
s5p-sysmmu s5p-sysmmu.24: stop latency exceeded, new value 750 ns
s5p-sysmmu s5p-sysmmu.23: start latency exceeded, new value 1083 ns
s5p-sysmmu s5p-sysmmu.23: state save latency exceeded, new value 6875 ns
s5p-sysmmu s5p-sysmmu.23: stop latency exceeded, new value 750 ns
enp32khz: incomplete constraints, leaving on
en32khz_cp: incomplete constraints, leaving on
en32khz_ap: incomplete constraints, leaving on
vdd_int: incomplete constraints, leaving on
vdd_arm: incomplete constraints, leaving on
gpio_set_debounce: gpio-165 status -22
gpio_set_debounce: gpio-185 status -22
input: gpio-keys.8 as /devices/gpio-keys.8/input/input5
mmc_host mmc2: Bus speed (slot 0) = 100000000Hz (slot req 50000000Hz, actual 50000000HZ div = 1)
mmc2: new high speed SDIO card at address 0001
rtc-max77686 max77686-rtc: setting system clock to 2012-11-23 16:29:30 UTC (1353688170)
VDD_ARM : L0, 1275000 uV
VDD_ARM : L1, 1225000 uV
VDD_ARM : L2, 1187500 uV
VDD_ARM : L3, 1125000 uV
VDD_ARM : L4, 1100000 uV
VDD_ARM : L5, 1075000 uV
VDD_ARM : L6, 1050000 uV
VDD_ARM : L7, 1037500 uV
VDD_ARM : L8, 1025000 uV
VDD_ARM : L9, 1000000 uV
VDD_ARM : L10, 975000 uV
VDD_ARM : L11, 962500 uV
VDD_ARM : L12, 950000 uV
VDD_ARM : L13, 937500 uV
VDD_ARM : L14, 925000 uV
VDD_ARM : L15, 912500 uV
ALSA device list:
#0: DAISY-I2S
EXT3-fs (mmcblk0p7): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (mmcblk0p7): error: couldn't mount because of unsupported optional features (244)
usb 1-2.2: new high-speed USB device number 3 using s5p-ehci
usb 1-2.2: New USB device found, idVendor=2232, idProduct=1037
usb 1-2.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-2.2: Product: WebCam SC-03FFM12339N
usb 1-2.2: Manufacturer: Generic
usb 1-2.2: SerialNumber: 200901010001
s5p-dp s5p-dp: EDID data does not include any extensions.
s5p-dp s5p-dp: EDID Read success!
s5p-dp s5p-dp: Link Training success!
EXT4-fs (mmcblk0p7): ext4_orphan_cleanup: deleting unreferenced inode 290261
EXT4-fs (mmcblk0p7): ext4_orphan_cleanup: deleting unreferenced inode 290211
EXT4-fs (mmcblk0p7): ext4_orphan_cleanup: deleting unreferenced inode 290367
EXT4-fs (mmcblk0p7): ext4_orphan_cleanup: deleting unreferenced inode 290253
EXT4-fs (mmcblk0p7): 4 orphan inodes deleted
EXT4-fs (mmcblk0p7): recovery complete
EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:7.
devtmpfs: mounted
Freeing init memory: 264K
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No space left on device
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No space left on device
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No space left on device
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No space left on device
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No space left on device
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No space left on device
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No space left on device
udevd[226]: starting version 175
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: vendor=0x2df, device=0x912a, class=255, fn=2
cfg80211: Calling CRDA to update world regulatory domain
init: plymouth main process (91) killed by SEGV signal
init: plymouth-splash main process (400) terminated with status 2
industrialio: module is from the staging directory, the quality is unknown, you have been warned.
isl29018: module is from the staging directory, the quality is unknown, you have been warned.
sbs-battery 4-000b: sbs-battery: battery gas gauge device registered
i2c-core: driver [sbs-battery] using legacy suspend method
s5p-mfc s5p-mfc-v6: state restore latency exceeded, new value 1750 ns
s5p-mfc s5p-mfc-v6: stop latency exceeded, new value 917 ns
s5p-sysmmu s5p-sysmmu.4: state restore latency exceeded, new value 8292 ns
s5p-sysmmu s5p-sysmmu.3: state restore latency exceeded, new value 5084 ns
s5p-sysmmu s5p-sysmmu.3: stop latency exceeded, new value 875 ns
s5p-sysmmu s5p-sysmmu.3: start latency exceeded, new value 1209 ns
uvcvideo: Found UVC 1.00 device WebCam SC-03FFM12339N (2232:1037)
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
s5p-sysmmu s5p-sysmmu.4: state save latency exceeded, new value 4959 ns
s5p-sysmmu s5p-sysmmu.3: start latency exceeded, new value 1291 ns
init: failsafe main process (505) killed by TERM signal
init: hybrid-gfx main process (592) terminated with status 1
------------[ cut here ]------------
WARNING: at /home/chrome-bot/trunk/src/third_party/kernel/files/kernel/irq/manage.c:430 __enable_irq+0x88/0xd0()
Unbalanced enable for IRQ 243
Modules linked in: uvcvideo videobuf2_vmalloc isl29018(C) industrialio(C) sbs_battery joydev mwifiex_sdio(+) mwifiex cfg80211 btmrvl_sdio(+) btmrvl spidev rfcomm bluetooth
[] (unwind_backtrace+0x0/0xec) from [] (dump_stack+0x20/0x24)
[] (dump_stack+0x20/0x24) from [] (warn_slowpath_common+0x5c/0x74)
[] (warn_slowpath_common+0x5c/0x74) from [] (warn_slowpath_fmt+0x40/0x48)
[] (warn_slowpath_fmt+0x40/0x48) from [] (__enable_irq+0x88/0xd0)
[] (__enable_irq+0x88/0xd0) from [] (enable_irq+0x64/0x84)
[] (enable_irq+0x64/0x84) from [] (exynos_dp_resume+0x70/0x78)
[] (exynos_dp_resume+0x70/0x78) from [] (fimd_power_on+0x11c/0x1c4)
[] (fimd_power_on+0x11c/0x1c4) from [] (fimd_display_power_on+0x90/0xb0)
[] (fimd_display_power_on+0x90/0xb0) from [] (exynos_drm_display_power+0x7c/0xa8)
[] (exynos_drm_display_power+0x7c/0xa8) from [] (exynos_drm_encoder_dpms+0xc4/0x100)
[] (exynos_drm_encoder_dpms+0xc4/0x100) from [] (drm_helper_connector_dpms+0xc8/0xf8)
[] (drm_helper_connector_dpms+0xc8/0xf8) from [] (drm_fb_helper_dpms+0x88/0xcc)
[] (drm_fb_helper_dpms+0x88/0xcc) from [] (drm_fb_helper_blank+0x64/0x6c)
[] (drm_fb_helper_blank+0x64/0x6c) from [] (fb_blank+0x4c/0x78)
[] (fb_blank+0x4c/0x78) from [] (do_fb_ioctl+0x52c/0x5d0)
[] (do_fb_ioctl+0x52c/0x5d0) from [] (fb_ioctl+0x50/0x60)
[] (fb_ioctl+0x50/0x60) from [] (do_vfs_ioctl+0x4f4/0x568)
[] (do_vfs_ioctl+0x4f4/0x568) from [] (sys_ioctl+0x60/0x84)
[] (sys_ioctl+0x60/0x84) from [] (ret_fast_syscall+0x0/0x30)
---[ end trace 63909a4ceb269ae3 ]---
s5p-dp s5p-dp: EDID data does not include any extensions.
s5p-dp s5p-dp: EDID Read success!
s5p-dp s5p-dp: Link Training success!
------------[ cut here ]------------
WARNING: at /home/chrome-bot/trunk/src/third_party/kernel/files/kernel/irq/manage.c:430 __enable_irq+0x88/0xd0()
Unbalanced enable for IRQ 243
Modules linked in: uvcvideo videobuf2_vmalloc isl29018(C) industrialio(C) sbs_battery joydev mwifiex_sdio(+) mwifiex cfg80211 btmrvl_sdio(+) btmrvl spidev rfcomm bluetooth
[] (unwind_backtrace+0x0/0xec) from [] (dump_stack+0x20/0x24)
[] (dump_stack+0x20/0x24) from [] (warn_slowpath_common+0x5c/0x74)
[] (warn_slowpath_common+0x5c/0x74) from [] (warn_slowpath_fmt+0x40/0x48)
[] (warn_slowpath_fmt+0x40/0x48) from [] (__enable_irq+0x88/0xd0)
[] (__enable_irq+0x88/0xd0) from [] (enable_irq+0x64/0x84)
[] (enable_irq+0x64/0x84) from [] (exynos_dp_resume+0x70/0x78)
[] (exynos_dp_resume+0x70/0x78) from [] (fimd_power_on+0x11c/0x1c4)
[] (fimd_power_on+0x11c/0x1c4) from [] (fimd_display_power_on+0x90/0xb0)
[] (fimd_display_power_on+0x90/0xb0) from [] (exynos_drm_display_power+0x7c/0xa8)
[] (exynos_drm_display_power+0x7c/0xa8) from [] (exynos_drm_encoder_dpms+0xc4/0x100)
[] (exynos_drm_encoder_dpms+0xc4/0x100) from [] (drm_helper_connector_dpms+0x94/0xf8)
[] (drm_helper_connector_dpms+0x94/0xf8) from [] (drm_fb_helper_dpms+0x88/0xcc)
[] (drm_fb_helper_dpms+0x88/0xcc) from [] (drm_fb_helper_blank+0x64/0x6c)
[] (drm_fb_helper_blank+0x64/0x6c) from [] (fb_blank+0x4c/0x78)
[] (fb_blank+0x4c/0x78) from [] (do_fb_ioctl+0x52c/0x5d0)
[] (do_fb_ioctl+0x52c/0x5d0) from [] (fb_ioctl+0x50/0x60)
[] (fb_ioctl+0x50/0x60) from [] (do_vfs_ioctl+0x4f4/0x568)
[] (do_vfs_ioctl+0x4f4/0x568) from [] (sys_ioctl+0x60/0x84)
[] (sys_ioctl+0x60/0x84) from [] (ret_fast_syscall+0x0/0x30)
---[ end trace 63909a4ceb269ae4 ]---
mwifiex_sdio mmc2:0001:1: WLAN FW already running! Skip FW download
mwifiex_sdio mmc2:0001:1: WLAN FW is active
mwifiex_sdio mmc2:0001:1: ignoring F/W country code US
mwifiex_sdio mmc2:0001:1: driver_version = mwifiex 1.0 (14.66.27.p2)
fuse init (API version 7.18)
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
warning: process `colord' used the deprecated sysctl system call with 8.1.2.
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
EXT4-fs (mmcblk0p5): couldn't mount RDWR because of unsupported optional features (ff000000)
EXT4-fs (mmcblk0p1): recovery complete
EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p3): couldn't mount RDWR because of unsupported optional features (ff000000)
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
s5p-dp s5p-dp: Timeout of video streamclk ok
s5p-dp s5p-dp: EDID data does not include any extensions.
s5p-dp s5p-dp: EDID Read success!
s5p-dp s5p-dp: Link Training success!
usb 3-1: new full-speed USB device number 2 using xhci-hcd
usb 3-1: New USB device found, idVendor=1532, idProduct=0012
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Razer Salmosa
usb 3-1: Manufacturer: Razer
input: Razer Razer Salmosa as /devices/exynos-dwc3/dwc3.0/xhci-hcd/usb3/3-1/3-1:1.0/input/input6
generic-usb 0003:1532:0012.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer Salmosa] on usb-xhci-hcd-1/input0
mlan0: no IPv6 routers present
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged
exynos-hdmi-audio exynos-hdmi-audio: hdmi not plugged